Drawing analysis

    The drawing requirements, linked to the model

    The STEP file says what the part looks like. The PDF drawing says what it has to meet. Glintify reads the requirements from the drawing's text layer, collects them with a reference to the sheet and shows them on the 3D model. The estimator sees what passes, what is routed to another operation and what needs an answer before the price goes out.

    // From the drawing

    What is read from the PDF drawing

    Everything is based on the drawing's text layer and vectors. Each requirement gets a reference to sheet and location, so you can check it against the original.

    Title block

    Drawing number, revision, material, thickness, finish, surface roughness, general tolerance and scale. The revision is compared with the CAD file name.

    Material and thickness

    EN designations such as EN 1.4301 and common trade names. Compared with the STEP model and marked Validated or Deviation.

    General tolerances ISO 2768

    Classes f, m, c and v with H, K or L. The tables from ISO 2768-1 and -2 are in the system and are checked against holes, cutouts, bend angles and flanges.

    Specific tolerances

    Plus-minus on dimensions, limit deviations such as +0.3/−0.7 and ISO 286 fits such as H7. A hole tolerance is only linked when the diameter symbol is next to the dimension.

    Surfaces and edges

    Ra, powder coating, zinc plating, anodising, pickling, blasting, broken edges and chamfers are recognised as requirements to decide on.

    Welds to ISO 2553

    Throat a, process to ISO 4063, sides, all-round and field welds, plus general notes such as a3 unless otherwise stated.

    Geometric tolerances

    Flatness, position, perpendicularity and symmetry are recognised, shown with their datums and stop the price until the estimator has assessed them.

    Notes and parts list

    Bend notes, the parts list against STEP occurrences with a quantity check, certificates to EN 10204 3.1, marking and grain direction are noted.

    // Binding

    How the requirements are linked to the 3D model

    A requirement is not done just because it has been read. It has to sit on the right feature or face in the model, and it has to be clear how certain it is.

    • Right file: drawing and CAD are paired by file name and revision, a differing revision is flagged.
    • Views: the drawing views are registered against the model's projection, flat views against our own unfolding.
    • Dimensions: the drawing dimension is measured in the model and becomes bound or a deviation, with the measured value.
    • Faces: surface roughness and surface requirements are coloured on the right faces, outside or inside only once the side is confirmed.
    • Evidence per field: Read, Corroborated or Verified. Verified requires the model as independent evidence.
    • Requirements mode in 3D: red does not pass, amber rerouted to another operation, white edge under review, blue passes.
    // Price

    How the requirements affect the cost calculation

    Two requirement types control routing automatically. The rest are recognised and stop the price until the estimator has chosen.

    Hole tolerance

    The requirement is checked against the process tolerance per thickness and material. If the laser cannot meet it, the hole is routed to CNC drilling at your rates.

    Bend tolerance

    Angle, flange length and radius are checked per press brake. A machine that cannot meet the requirement is not preselected, and if no machine can, the price stops.

    Weld symbols

    Throat a, length, sides and process go into the weld calculation once the estimator has pointed out the joint in the model.

    Surface requirements, finish and certificates

    Recognised and shown, but they do not set the option. The line stays Needs an answer until the estimator has chosen the finish or certificate.

    No price without a basis

    A requirement without a cost model becomes Blocked. The item is marked preliminary, and the quote cannot be sent until the review is approved.

    Corrections that come back

    The estimator's correction can be saved as a customer rule, so the same drawing style is read correctly next time.

    // Limits

    What we do not read yet

    So you know what is still the estimator's job.

    • Scanned drawings without a text layer. There is no OCR.
    • PDF files over 15 MB, and more than one drawing per analysis.
    • Title block labels in languages other than English, Swedish and German.
    • Geometric tolerances are not priced, they stop the price and are shown.
    • Dimensions spanning two parts and freely rotated perspective views are not linked to the model.
    • Surface roughness and finish are chosen by the estimator, not by the drawing.

    Common questions about drawing analysis

    Do we need to send both PDF and STEP?

    Ideally both. The STEP file gives the geometry, the PDF drawing gives the requirements. A PDF without STEP gives a list of requirements without a 3D check, and a STEP without PDF gives geometry without tolerances.

    Does Glintify read scanned drawings?

    No. The analysis is based on the PDF's text layer and vectors. A scanned image without a text layer gives no requirements, and the drawing goes to manual review.

    Does a drawing requirement automatically become a price?

    Hole tolerance and bend tolerance control routing and machine choice automatically. Other requirements are recognised, shown on the model and stop the price until the estimator has decided.

    Which standards does the system recognise?

    ISO 2768 for general tolerances, ISO 286 for fits, ISO 2553 and ISO 4063 for welding, Ra for surface roughness, and document requirements such as EN 10204 3.1, ISO 9013 and ISO 13920.

    Does the system learn our customers' drawings?

    Yes, per customer. When the estimator corrects an interpretation, it can be saved as a customer rule and is reused the next time the same customer sends a drawing in the same style.

    Bring a drawing from your everyday work

    Send a PDF drawing with its STEP file. We show which requirements are read, how they sit on the model and what would have stopped the price.

    Book an analysis